 |
 |
 |
|
Saw Trax Panel Saws - Never goes out of Square!
Dimensions: 5' x 52"
Shipping Box Dimensions: 70"x15"x76.5"
Drop shipped from factory in Georgia
Includes an Olfa knife cutter for foam board - cross cuts and rip cuts. Knife blade retracts for safe removal.
Includes the Stop Bar & Tapes - this is a cross cut measurement system that includes a left and right tape and a stop block.
3 hp. 15 amp Porter saw uses low cost 7 1/4" carbide tip saws blades found everywhere.
No tools needed to change saw blade.
Can score or bevel cut material. Able to view saw blade when starting cut.
Never goes out of square - Acc-Square adjustment locks in place.
Rips Cut in either direction, bevel cut up to 45έ.
Dust Collection with hose.
Folding stand folds like a ladder - easy for one person to use.
Stand with wheels means easy movement.
Frame wheels are large 5" which don't support saw during use-saw won't roll away on you.
Spring hold down for holding thin sheets in place.
Instructional CD shows you how to use it.
Note: Machine is shown with an optional Full Mid-Fence. |
|
|
|
|
|
 |
|
 |
|
Features
- 52" Cross Cut
- Rip Cut Either Direction
- .0156" With Optional Second set of Roller Bearings
- Can use Router in Same Carriage
- Bevel Cut to 45 Degrees
- Control or Vary Depth of Cut
- 2 Carriage locks ensure no play when ripping
- Easily Expandable Frame
- Able To View Saw Blade and mark on Material
- The most Material Support Rollers in its class
- 1 Simple Squaring Adjustment, Locks in Place
- Uses Standard 7Ό" Blade, (Found Everywhere)
- 1 3/4" Depth of Cut,
- Easily Change Saw Blades or Saw if needed.
|
|
|
 |
|
 |
|
|
|
