|
|
|
|
|
|
WEBERmade Application Tools
|
Our Price:
|
|
|
Once you get your tape tool clamped or bolted to your table or work bench, you simply pull your application tape out, over and just past the end of your vinyl. You can adjust the tension of your tape coming off the roll with a quick turn of the tensioning knob. Once you get your tape out and over your vinyl, you simply fasten the application tape to your table and squeegee it down back towards the roll of application tape. The tension that you set with the clutch keeps your application tape up and off your vinyl until you squeegee it down. * You can place one or more rolls of tape up to 48'' onto each of the 2 shafts. * The end support mounting brackets when they are fastened to your table are 3 inches wider than the tape tool.
|
|
|
|
|
|
|
|
|
|
Laminator Big Squeegee
|
|
Our Price:
|
|
|
The Laminator is designed for laminating and mounting prints. It will mount cut vinyl if you use a different tool for masking. Several standard sizes are available that are made for use with printers up to 62 inches. The front edge of the laminator is covered with a replaceable felt. This tool is not to be used for masking.
|
|
|
|
|
|
|
|
|
|
Rivet/Dent Big Squeegee
|
|
Our Price:
|
|
|
This tool is used for mounting small graphics and mounting graphics over rivets and irregular surfaces. It will apply application tape to long graphics.
|
|
|
|
|
|
|
|
|
|
Cut Vinyl Big Squeegee
|
|
Our Price:
|
|
|
An all-around tool for masking and mounting cut vinyl. It can also be used for mounting and laminating printed graphics. The standard size for this tool is 26 and 32 inches. Both front and back edges have replaceable felt. The rear edge allows you to mask multiple small pieces.
|
|
|
|
